MEMORY

 

 

 

 

 

 

4

S T A R T

Press the START key if you entered a

 

 

Speed Dial number or a full number.

 

 

 

The document will be scanned and stored in memory. Your fax will then dial the receiving machine and trans- mit the document (redialling will be done automatically if necessary).

If the memory becomes full...

If the memory becomes full while the document is being scanned, MEMORY IS FULL will appear in the display.

Press the START key if you want to transmit the pages which have been stored up to that point in memory. The remaining pages will be ejected from the feeder. After transmission, the memory will be cleared and you can transmit the remaining pages. You will also need to transmit the page which was being scanned when the memory filled up.

Press the STOP key if you want to cancel the entire transmission.

Substitute reception into memory

This is a back-up function which is automatically activated if your fax runs out of paper, the printing ribbon needs replacement, or the paper jams.

When you have received a document in memory, FAX RX IN MEMORY will appear in the display, alternating with OUT OF PAPER, FILM END, or PAPER JAM. When you add paper, replace the imaging film, or clear the jam, the stored documents will automatically print out.

If you received documents in memory because the fax ran out of paper, be sure to add paper which is the same size as the paper previously used. If not, the document print-out size may not match the size of the printing paper.

SPECIAL FUNCTIONS

7-7

Page 83
Image 83
Sharp FO-1650, FO-1850 operation manual Memory, If the memory becomes full, Substitute reception into memory