ENTERING LETTERS FOR NAMES
Names are programmed by pressing the number keys. You will notice that letters are marked above each of the number keys "2" through "9". To enter a letter (or number), press the appropriate key one or more times until the letter appears in the display (the number will appear first, followed by the letters in the order marked above the key). The keys used for entering letters and editing are shown below.
Space
Press this key twice to enter a space.
Letters and numbers
To enter a letter or number, press the appropriate key repeatedly until the desired number/letter appears in the display (the number appears first, then the letters in the order marked above the key).
ABC
1 2
GHI JKL
4 5
PRS TUV
7 8
SLOW PLAY OPER
0
DEF | S P E E D D I A L | |
3 | ||
| ||
MNO | R E D I A L | |
6 |
| |
WXY | H O L D / S E A R C H | |
9 |
| |
FAST PLAY | S P E A K E R | |
|
Delete
Press this key to delete the letter highlighted by the cursor (if the cursor is to the right of the last letter entered, it will backspace and delete the last letter).
Shift
Press this key once to change case (press it again to change back).
Cursor left
Press this key to move the cursor to the left.
Symbols
Press either key repeatedly until the desired symbol appears (see the symbol list on the following page).
Cursor right
Press this key to move the cursor to the right.
Comments:
•Enter "Q" with the "7" key, and "Z" with the "9" key (these are not marked on the machine).
•
•
To enter two letters in succession which require using the same key, press the SPEAKER key once after entering the first letter, then enter the second letter.
To change one individual letter to another, move the cursor to that letter and enter the desired letter. The new letter will simply replace the old one.
INITIAL SETTINGS |
