<P=004>
Direct Call
If desired, you can allow a designated phone number to access a pe rsonal box
directly when the answering machine is ac tivated. In this case, when the caller
calls, he or she will immediately hear the outgoing message of th e pe rs on al box
instead of that of the general box. You can designate one phone nu mber for each
personal box.
Note: This function cannot be used if you are using Distinctive Ringin g.
1Press the keys shown at left. "DIRECT
CALL #" will appear in the display.
2Press "1" to enter a number, or "2" to
clear a number. (If you pressed "2", go
to Step 5.)
3Enter the number of the personal box to
be accessed directly.
4Enter the phone number, including the
area code, by pressing the number keys
(the number must be 10 digits long).
5Press the START key and then the
STOP key.
START
STOP
FUNCTION
0
1
12
5
5
5
3
2
1
4
5
5
5
Preventing voice calls
With Caller ID turned on, you can use the Anti Junk Fax function de sc ribed in the
following section to prevent voice calls as well as fax recept ions (the Anti Junk Fax
function can normally only prevent faxes) .
In this case, when a voice call or a fax transmission comes in from a number you
have specified as a "Junk Number", your fax will break the connecti on as soon as it
receives the calling phone number from the caller ID servi ce (before the second
ring).
To use this function, set Option Setting 11 to YES as described in Chapter 8,
"Optional Settings", and then enter the number in the Anti Junk Nu m be r Li st as
described in "Anti Junk Fax" in the following section of this ch apter.
Note: This function cannot be used if you are using Distinctive Ringin g.
or
(Example)
(Example)