Canon W2200 Error Messages, 7-16, GARO Error nnnn, Replace x Tank, x Ink Tank NG, No x Ink Tank

Error Messages

GARO Error nnnn

Problem 1: A coded error (where “nnnn” is the number) has occurred during print job processing.

Solution: Press the Online button to set the printer online then try to start the print job again. However, this may not restore normal printing.

Solution: Switch off the printer, wait a few seconds, then switch the printer on again, and try to start the print job again.

Solution: If normal printing is not restored after following the procedures above, note the number of the error and call for service.

Replace x Tank

Problem 1: The ink tank of the displayed color (x = Y, M, PM, C, PC, Bk) has run out.

Solution: Replace the color ink tank with a new one. (ÆP.6-2)

x Ink Tank NG

Problem 1: The installed ink tank does not match the color displayed in the message (x = Y, M, PM, C, PC, Bk) and cannot be used in this printer, or an empty ink tank was loaded in the slot.

Solution: Read the message and select the correct color ink tank for replacement.

Make sure that the ink tank is installed correctly. (ÆP.6-2)

No x Ink Tank

Problem 1: The ink tank of the displayed color (x= Y, M, PM, C, PC, Bk) is not installed.

Solution: Read the message and select the correct color ink tank for replacement.

Make sure that the ink tank is installed correctly. (ÆP.6-2)

Problem 2: A problem has occurred with the ink tank.

Solution: Install a new ink tank. (ÆP.6-2)

7-16

Troubleshooting