Canon W2200 manual Print Job Results Abnormal, Poor Print Quality, Printing is faint, Ink smeared

Print Job Results Abnormal

If the results you see in the print job is not what you expect, check the items described below.

Poor Print Quality

Printing is faint.

Problem 1: Printing on the wrong side of the sheet.

Solution: Determine which side is the correct print side. It will not print correctly if printed on the back.

Problem 2: Printhead nozzles are clogged.

Solution: Print a nozzle check pattern, check the condition of the printhead nozzles, If you determine that the printhead nozzles are clogged, clean the printhead.

(ÆP.7-28)

Problem 3: Ink filling is not completed.

Solution: If you can see bubbles in the ink hoses, perform Head Cleaning B. (ÆP.7-28)

Solution: If you do not see any ink in the ink hose, check the ink left in the ink tanks to make sure that more than 40% of the ink is left, and then perform Head Cleaning C. (ÆP.7-28) When there is little ink remaining, replace the ink tank with a new tank, and then perform a printhead cleaning. (ÆP.6-2)

Ink smeared.

Problem 1: Printing with high density ink on plain paper.

Solution: Lower the Intensity setting (print density) in the printer driver. (ÆPrinter Driver Help)

Problem 2: The selected Media Size is not the same as the media loaded in the paper supply source.

Solution: Confirm the current selection for the Media Size. If the setting is not correct, stop the print job, select the correct setting, then start the print job again. (ÆP.2-8)

Print Job Results Abnormal

7-9