Note

z The printer is shipped from the factory with the “Media Size” set for “B5-JIS” and the “Media Type” set for “Plain Paper”.

z While printing with one of the settings described above, if the ink blurs or if printing is too light, select Special 1 to 5 for the “Media Type”. These settings adjust the ink density in five steps, starting with the lowest density (1) to the highest density (5). The setting may require testing and adjustment, depending on the media in use and the content of the image.

z “Proof C” and “Proof D” are displayed as media type items on the operation panel, but these items are not currently available for selection. These are preliminary settings for selection to be added in the future.

z To achieve better quality printing, perform the “Paper Adjust” setting on the operation panel.(Æ “Adjusting the Amount of Line Feed for Each Media” P.7-40)

1 Press the Online button to switch off￿￿￿￿￿￿￿￿the Online lamp.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿

The printer is set offline.

2 Press the Set Media button.

Set Media

Cancel Job/

UtilitySetup

Reset/Enter

Power

The Set Media menu opens.

Online Ink Replace

Online Message

2-14

Print Media You Can Use

Page 36
Image 36
Canon W2200 manual Press the Online button to switch offthe Online lamp, Press the Set Media button