Canon W2200 manual 6-16, Remove the old printhead

11

Caution

Remove the old printhead.

zIf the printer was operating before you started to remove the printhead, allow the printer to cool for a few minutes. The metal parts of the printhead become very hot during printing. To avoid minor burns, never touch the metal parts of the printhead.

Important

zPlace the removed printhead in a plastic bag and seal the bag.

12 Hold the new printhead by its grips (a) and remove it from its case, then remove the first orange protective cap (b). While pressing inward on the tabs (d) of the second protective cap (c) as shown in the illustration, pull down to remove.

a

d

b d

c

Important

zThe nozzles under protective cap 2 (c) are covered with ink. Handle the printhead carefully to avoid touching these nozzles or dropping the printhead and causing ink stains.

zWhen handling the printhead, always hold it by the grips (a) on the left and right sides of the printhead.

6-16

Maintenance