Canon W2200 7-18, Service Call, Rep. Waste Ink, Install P.head Press Online Key, No MediaCass.n

Service Call

Problem 1: The stopper and tape inside the printer under the back upper cover have not been removed.

Solution: Switch off the printer, remove the back upper cover, remove the stopper

and tape, then switch the printer on again. (ÆSetup Guide)

Problem 2: A problem has occurred in the printer.

Solution: Switch the printer off. Wait for 3 seconds then switch the printer on again.

Solution: If the procedure above do not restore normal operation of the printer, read the message, note the message in the lower line of the display, switch the printer off, and call for service.

Rep. Waste Ink

Problem 1: The waste ink tank is nearly full and requires replacing very soon.

Solution: Call for service.

Install P.head Press Online Key

Problem 1: The printhead is not installed.

Solution: Install the printhead correctly. (ÆSetup Guide)

Printhead NG Press Online Key

Problem 1: The installed printhead cannot be used with the printer.

Solution: Install the correct printhead designed for the printer. (ÆP.6-11)

No Media:Cass.n

Problem 1: The paper supply in Cassette n (n = 1,2) runs out.

Solution: Install the size and type of print media named in the second line of the display on the operation panel then press the Online button. (ÆP.2-8)

7-18

Troubleshooting