Lenovo M50e Series, A50 manual Installing adapters, What to do next

To install a DIMM:

1.Remove the cover. See “Removing the cover” on page 9.

2.You might have to remove an adapter to gain access to the DIMM slots. See “Installing adapters” on page 12.

3.To locate the DIMM connectors. See “Identifying parts on the system board” on page 10.

4.Open the retaining clips.

5.Make sure the notches in the DIMM align with the tabs on the connector. Push or insert the DIMM straight down into the connector until the retaining clips close.

What to do next:

vTo work with another option, go to the appropriate section.

vTo complete the installation, go to “Replacing the cover and connecting the cables” on page 23.

Installing adapters

This section provides information and instructions for installing and removing adapters. Your computer has three expansion slots for PCI adapters. One slot, used for an AGP adapter, is available on some models. You can install an adapter up to 340 mm (13.4 inches) long in the AGP slot, PCI slot 2, or PCI slot 3. You can install an adapter up to 200 mm (7.9 inches) long in PCI slot 1.

To install an adapter:

1.Remove the cover. See “Removing the cover” on page 9.

12User Guide