Hitachi CPS225W user manual INSTALLATION continued, Cabling

INSTALLATION (continued)

Cabling

Refer to the table below for connecting each terminal of the projector to a device.

Table 2. Cabling

Function	Terminal	Cable
	RGB	Accessory RGB cable or optional RGB
Analog RGB input		cable with D-sub 15-pin shrink jack and
		inch thread screws
RS-232C communication	CONTROL	Optional RS-232C cable
Audio input	AUDIO	Optional audio cable with stereo mini jack
(from the computer)
	COMPONENT VIDEO Y
Component video input	COMPONENT VIDEO CB/PB	Accessory component video cable
	COMPONENT VIDEO CR/PR
S-video input	S-VIDEO	Optional S-video cable with mini DIN 4-pin
		jack
Video input	VIDEO
		Optional video/audio cable with RCA jack
Audio input	AUDIO L
(from video equipment)	AUDIO R

CAUTION • Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate “SAFETY INSTRUCTIONS”.

•Before connecting, turn off to all devices to be connected, except for the USB cable.

•The cables may have to be used with the core set to the projector side. Use the cables which are included with the projector or specified.

NOTE • Before connecting, read instruction manuals of the devices to be connected, and make sure that the projector is compatible with the device.

•Secure the screws on the connectors and tighten.

•For some RGB input modes, the optional Mac adapter is necessary.

•To select the digital RGB input, the comuter may need some settings. See the manuals of the computer for details.

•Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

•Refer to the “TECHNICAL” section for the pin assign ment of connectors.

•Refer to manual of the optional RS-232C cable, for the communication data.

•For others, consult your dealer.

ENGLISH-6