Hitachi CPS225W OPERATIONS continued, Basic Operation, Description, English, Adjust Magnification

KEYSTONE Set/Clear KEYSTONE Mode : Press the KEYSTONE button.

(*) Adjust Keystone : Press the / button in the KEYSTONE mode.

reduces the bottom size of image ↔ reduces the top size of image

NOTE • Use the remote controller at a distance of approximately 3m from the sensor on the front of the projector, and within a range of 30° left-right. Strong light and obstacles will interfere with

operation of the remote controller.(It continue the next page.) ENGLISH-9

OPERATIONS (continued)

Basic Operation

The basic operations shown in Table 3 is performed from the supplied remote controller or the projector control panel. Items indicated by (*) may be used from the control panel.

Table 3 . Basic Operation

Item			Description
	Select Input Signal (*) : Press the INPUT button.
	RGB→ VIDEO → S-VIDEO → COMPONENT (→ RGB)
	Select RGB Input : Press the RGB button.
INPUT	VIDEO/S-VIDEO/COMPONENT → RGB
	Select Video Input : Press the VIDEO button.
SELECT
	RGB → VIDEO/S-VIDEO/COMPONENT
	VIDEO → S-VIDEO → COMPONENT (→ VIDEO)
	• The selected signal name is displayed for approximately 3 seconds when the input
	signal is changed.
	Set/Clear Position Adjustment Mode :
	Press the POSITION button. The [ ] icon is displayed in the POSITION mode.
POSITION	Image Position Adjustment:
	Press the	, , and	buttons in the POSITION mode.
	• Valid only in the MAGNIFY mode with a video signal is input.
	• After approximately 10 seconds of inactivity the [			] icon is extinguished and the
	POSITION mode is cleared automatically.
	Initialize Each Item : Select an item and press the RESET button.
RESET (*)	Initialize Position Adjustment : Press the RESET button and the
	POSITION mode. This function is valid only when RGB signal is input.
	• Valid except for the VOLUME, LANGUAGE, H PHASE and WIHSPER.
	Set MAGNIFY Mode : Press the MAGNIFY			button.
	Move Magnified Area : Run the POSITION in the MAGNIFY mode.
	Adjust Magnification :
MAGNIFY	Press the MAGNIFY /		button in MAGNIFY mode.
	MAGNIFY	magnifies the image ↔ MAGNIFY				reduces the image
	Clear MAGNIFY Mode : Press the MAGNIFY OFF				button.
	• The MAGNIFY mode is cleared by running or setting the AUTO, ASPECT, INPUT
	SELECT or VIDEO, or by changing the input signal.
	Set/Clear FREEZE Mode : Press the FREEZE button. The [II] icon is
	displayed, and the image frozen, in the FREEZE mode.
FREEZE	• The FREEZE mode is cleared by running or setting POSITION, VOLUME, MUTE,
	Automatic Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing the
	input signal.
	• Do not forget to clear frozen static images.

ENGLISH