Canon W2200 manual Printer not Operating Correctly, Cannot Print, Printer not switched on

Printer not Operating Correctly

Check the following items when the printer does not operate and will not print.

Cannot Print

Printer not switched on.

Problem 1: Power button not switched on.

Solution: Press the Power button again to confirm that Online lamp, Message lamp, and operation panel light. (ÆP.1-7)

Problem 2: Power cord not supplying power to the printer.

Solution: Confirm that the power cord connections at the printer and the power supply are tight. (ÆSetup Guide)

Problem 3: Power supply not providing power.

Solution: Connect another device to the power supply to confirm that the outlet is providing power. If not supplying power, check the breaker switches for the power line. If you are on a power strip, determine if there is a switch between the plug receptacle and the main power line.

Problem 4: Power cord broken.

Solution: Call for service and request a new power cord.

Printer is on but not online.

Problem 1: Printhead is not installed.

Solution: Install the printhead. (ÆSetup Guide)

Problem 2: Ink tank(s) are not installed.

Solution: Confirm that all ink tanks are installed. (ÆSetup Guide)

Problem 3: A cover is open.

Solution: Close the cover named in the message displayed on the operation panel.

Problem 4: Printer is still warming up.

Solution: Immediately after the printer is switched on, it cannot print because it needs a several seconds to warm up. After switching on the printer, you must wait for the Online lamp to light and remain on.

Printer not Operating Correctly

7-3