SMC Networks SMC6824M manual Match access-list mac, Map access-list mac

COMMAND LINE INTERFACE

Command Mode

Privileged Exec

Example

Console#show map access-list mac

Access-list to COS of Eth 1/5

Access-list M5 cos 0

Console#

Related Commands

map access-list mac (4-147)

match access-list mac

This command changes the IEEE 802.1p priority of a Layer 2 frame matching the defined ACL rule. (This feature is commonly referred to as ACL packet marking.) Use the no form to remove the ACL marker.

Syntax

match access-list mac acl_name set priority priority no match access-list mac acl_name

•acl_name – Name of the ACL. (Maximum length: 15 characters)

•priority – Class of Service value in the IEEE 802.1p priority tag. (Range: 0-7; 7 is the highest priority)

Default Setting

None

Command Mode

Interface Configuration (Ethernet)

Command Usage

You must configure an ACL mask before you can change frame priorities based on an ACL rule.

Example

Console(config)#interface ethernet 1/12

Console(config-if)#match access-list mac a set priority 0

Console(config-if)#

4-149