SMC Networks SMC6824M manual Clock timezone, None

COMMAND LINE INTERFACE

clock timezone

This command sets the time zone for the switch’s internal clock.

Syntax

clock timezone name hour hours minute minutes {before-utc after-utc}

•name - Name of timezone, usually an acronym. (Default: UTC; Range: 1-29 characters)

•hours - Number of hours before UTC (0-12) or after UTC (0-13).

•minutes - Number of minutes before/after UTC. (Range: 0-59 minutes)

•before-utc- Sets the local time zone before (west) of UTC.

•after-utc- Sets the local time zone after (east) of UTC.

Default Setting

None

Command Mode

Global Configuration

Command Usage

This command sets the local time zone relative to the Coordinated Universal Time (UTC, formerly Greenwich Mean Time or GMT), based on the earth’s prime meridian, zero degrees longitude. To display a time corresponding to your local time, you must indicate the number of hours and minutes your time zone is east (before) or west (after) of UTC

Example

Console(config)#clock timezone Pacific hours 8 minute 0 before-UTC Console(config)#

Related Commands

show sntp (4-72)

4-73