SMC Networks SMC6824M manual 260, Show queue cos-map, Priority Commands Layer 3

PRIORITY COMMANDS

show queue cos-map

This command shows the class of service priority map.

Syntax

show queue cos-map [interface]

interface

•ethernet unit/port

-unit - Stack unit. (Range: 1-8)

-port - Port number. (Range: 1-26)

•port-channel channel-id(Range: 1-6)

Default Setting

None

Command Mode

Privileged Exec

Example

Console#show queue cos-map ethernet 1/1

Information of Eth 1/1

Traffic Class : 0 1 2 3 4 5 6 7

Priority Queue: 1 0 0 1 2 2 3 3

Console#

Priority Commands (Layer 3 and 4)

Table 4-66 Priority Commands (Layer 3 and 4)

Command	Function	Mode	Page
map ip port	Enables TCP/UDP class of service mapping	GC	4-261
map ip port	Maps TCP/UDP socket to a class of service	IC	4-262
map ip precedence	Enables IP precedence class of service	GC	4-262
	mapping
map ip precedence	Maps IP precedence value to a class of	IC	4-263
	service
map ip dscp	Enables IP DSCP class of service mapping	GC	4-264
map ip dscp	Maps IP DSCP value to a class of service	IC	4-265
map access-list ip	Sets the CoS value and corresponding output	IC	4-135
	queue for packets matching an ACL rule

4-260