SMC Networks SMC6824M manual Address Table Settings, Setting Static Addresses, 151

ADDRESS TABLE SETTINGS

CLI – This example sets the PoE power budget for port 1 to 8 watts, the priority to high (2), and then enables the power.

Console(config)#interface ethernet 1/1	4-171
Console(config-if)#power inline maximum allocation 8000	4-93
Console(config-if)#power inline priority 2	4-94
Console(config-if)#power inline auto	4-93
Console(config-if)#

Address Table Settings

Switches store the addresses for all known devices. This information is used to pass traffic directly between the inbound and outbound ports. All the addresses learned by monitoring traffic are stored in the dynamic address table. You can also manually configure static addresses that are bound to a specific port.

Setting Static Addresses

A static address can be assigned to a specific interface on this switch. Static addresses are bound to the assigned interface and will not be moved. When a static address is seen on another interface, the address will be ignored and will not be written to the address table.

Command Attributes

•Static Address Counts7 – The number of manually configured addresses.

•Current Static Address Table – Lists all the static addresses.

•Interface – Port or trunk associated with the device assigned a static address.

•MAC Address – Physical address of a device mapped to this interface.

•VLAN – ID of configured VLAN (1-4093).

7. Web Only.

3-151