User Guide for the Kyocera Xcursion Phone 35
Setting sounds for your phoneYou can set your phone to sound tones when you
open and close the flip, and when you turn the
phone on and off. Sounds will not occur during
an incoming call, if you are in a call, or if a
headset or car kit is attached to your phone.
Set sound when flip opens
1. Select Menu → Settings → Sounds →
FlipOpen.
2. Scroll through the list to hear the sounds.
3. Select a sound and press to save.
Set sound when flip closes
1. Select Menu → Settings → Sounds →
FlipClosed.
2. Scroll through the list to hear the sounds.
3. Select a sound and press to save.
Set sound when phone powers
onor off
1. Select Menu → Settings → Sounds →
PwrOn/Off Sound.
2. Select Enabled. To deselect this sound,
select Disabled.
Adjusting volumeYou can adjust the earpiece, speakerphone,
and ringer volume as well as key tones.
Adjusting the earpiece volume
To adjust the earpiece volume manually during
a call, press the key up or down.
To set the earpiece volume:
1. Select Menu → Settings → Sounds →
Earpiece Volume.
2. Press right to increase the volume,
or left to decrease the volume.
3. Press to select Save.
Adjusting the ringer volume
1. Select Menu → Settings → Sounds →
RingerVolume.
2. Press right to increase the volume,
or left to decrease the volume.
3. Press to select Save.
Adjusting speakerphone volume
1. Select Menu → Settings → Sounds →
Spkrphone Volume.
2. Press right to increase the volume,
or left to decrease the volume.
3. Press to select Save.
Adjusting key tone volume
You can change the volume of the tones the phone
makes when you press the keys.
1. Select Menu → Settings → Sounds →
KeyVolume.
2. Press right to increase the volume,
or left to decrease the volume.
3. Press to select Save.
82-N8671-1EN.book Page 35 Tuesday, October 4, 2005 3:49 PM