Kyocera KX160B, KX160A manual Setting up the camera for photos, Using the Camera, Is activated

4USING THE CAMERA

Tips before operating your camera

•You cannot activate the camera while on an active call or while browsing files in the media gallery.

•Once the camera is active, the home screen acts as the viewfinder.

•If you get a “Low memory” error on your phone’s screen, check your resolution and quality compression settings. See “Setting up the camera” on this page.

•If there is no activity within approximately 45 seconds after you turn your camera on, then the camera quits and returns to the previous launch point.

•Menu settings and options can only be accessed when the camera is active.

Setting up the camera for photos

1.With the flip open, select Menu → Camera.

2.Select Options.

3.Scroll left or right on the horizontal menu bar

using .

4.Select Settings.

5.Scroll down to highlight an option and press :

–Flash On, Off, or Automatic.

–Resolution options are 640 x 480, 320 x 240 (best for sending to email and viewing), and 160 x 120.

–Low Light Mode brightens the picture for low light environments.

–Self Timer options are Off (default) or 3, 5, or 10 second pauses. When set, the camera beeps tones from 3 , 5 or 10 seconds down to the time the shutter snaps the picture automatically. Self Timer is not available when Multishot mode

is activated.

–Multishot options are On or Off (default). When set to On, the camera allows you to take multiple pictures (up to six) while the camera key is pressed and held. A tone plays each time a picture is taken. A second tone plays when the final picture is taken.

–Shutter Sound sets the sound used when the shutter closes while taking a picture.

–White Balance allows the camera to adjust to whites. Useful feature for optimizing picture taking in different light situations. Options are Automatic, Fluorescent, Incandescent, or Daylight.

18 Using the Camera