SMC Networks SMC6824M manual DNS Commands, 286

DNS COMMANDS

DNS Commands

These commands are used to configure Domain Naming System (DNS) services. You can manually configure entries in the DNS domain name to IP address mapping table, configure default domain names, or specify one or more name servers to use for domain name to address translation.

Note that domain name services will not be enabled until at least one name server is specified with the ip name-servercommand and domain lookup is enabled with the ip domain-lookupcommand.

Table 4-74 DNS Commands

Command	Function	Mode	Page
ip host	Creates a static host name-to-address mapping	GC	4-287
clear host	Deletes entries from the host name-to-address	PE	4-288
	table
ip domain-name	Defines a default domain name for incomplete	GC	4-288
	host names
ip domain-list	Defines a list of default domain names for	GC	4-289
	incomplete host names
ip name-server	Specifies the address of one or more name	GC	4-290
	servers to use for host name-to-address
	translation
ip domain-lookup	Enables DNS-based host name-to-address	GC	4-291
	translation
show hosts	Displays the static host name-to-address	PE	4-292
	mapping table
show dns	Displays the configuration for DNS services	PE	4-293
show dns cache	Displays entries in the DNS cache	PE	4-293
clear dns cache	Clears all entries from the DNS cache	PE	4-294

4-286