SMC Networks SMC6824M Access-list mac mask-precedence, Mask MAC ACL 4-144 mac access-group4-146

COMMAND LINE INTERFACE

access-list mac mask-precedence

This command changes to MAC Mask mode used to configure access control masks. Use the no form to delete the mask table.

Syntax

[no] access-list ip mask-precedence {in out}

•in – Ingress mask for ingress ACLs.

•out – Egress mask for egress ACLs.

Default Setting

Default system mask: Filter inbound packets according to specified MAC ACLs.

Command Mode

Global Configuration

Command Usage

•You must configure a mask for an ACL rule before you can bind it to a port or set the queue or frame priorities associated with the rule.

•A mask can only be used by all ingress ACLs or all egress ACLs.

•The precedence of the ACL rules applied to a packet is not determined by order of the rules, but instead by the order of the masks; i.e., the first mask that matches a rule will determine the rule that is applied to a packet.

Example

Console(config)#access-list mac mask-precedence in

Console(config-mac-mask-acl)#

Related Commands

mask (MAC ACL) (4-144) mac access-group(4-146)

4-143