SMC Networks SMC6824M manual 266, Show map ip port, This command shows the IP port priority map

PRIORITY COMMANDS

•DSCP priority values are mapped to default Class of Service values according to recommendations in the IEEE 802.1p standard, and then subsequently mapped to the four hardware priority queues.

•This command sets the IP DSCP priority for all interfaces.

Example

The following example shows how to map IP DSCP value 1 to CoS value 0:

Console(config)#interface ethernet 1/5

Console(config-if)#map ip dscp 1 cos 0

Console(config-if)#

show map ip port

This command shows the IP port priority map.

Syntax

show map ip port [interface]

interface

•ethernet unit/port

-unit - Stack unit. (Range: 1-8)

-port - Port number. (Range: 1-26)

•port-channel channel-id(Range: 1-6)

Default Setting

None

Command Mode

Privileged Exec

Example

The following shows that HTTP traffic has been mapped to CoS value 0:

Console#show map		ip	port
TCP port	mapping	status: disabled
Port	Port no. COS
--------- --------			---
Eth 1/	5	80	0
Console#

4-266