SMC Networks SMC6824M manual 191, Configuring Vlan Behavior for Interfaces

VLAN CONFIGURATION

•Non-Member– VLANs for which the selected interface is not a tagged member.

Web – Click VLAN, 802.1Q VLAN, Static Membership by Port. Select an interface from the scroll-down box (Port or Trunk). Click Query to display membership information for the interface. Select a VLAN ID, and then click Add to add the interface as a tagged member, or click Remove to remove the interface. After configuring VLAN membership for each interface, click Apply.

Figure 3-81 Assigning VLAN Port and Trunk Groups

CLI – This example adds Port 3 to VLAN 1 as a tagged port, and removes Port 3 from VLAN 2.

Console(config)#interface ethernet 1/3

Console(config-if)#switchport allowed vlan add 1 tagged 4-238Console(config-if)#switchport allowed vlan remove 2

Configuring VLAN Behavior for Interfaces

You can configure VLAN behavior for specific interfaces, including the default VLAN identifier (PVID), accepted frame types, ingress filtering, GVRP status, and GARP timers.

Command Usage

•GVRP – GARP VLAN Registration Protocol defines a way for switches to exchange VLAN information in order to automatically register VLAN members on interfaces across the network.

3-191