SMC Networks SMC6824M manual Timeout login response, Login 4-15password-thresh

COMMAND LINE INTERFACE

Related Commands

login (4-15)password-thresh (4-19)

timeout login response

This command sets the interval that the system waits for a user to log into the CLI. Use the no form to restore the default setting.

Syntax

timeout login response [seconds] no timeout login response

seconds - Integer that specifies the number of seconds. (Range: 0 - 300 seconds; 0: disabled)

Default Setting

•CLI: Disabled (0 seconds)

•Telnet: 300 seconds

Command Mode

Line Configuration

Command Usage

•If a login attempt is not detected within the timeout interval, the connection is terminated for the session.

•This command applies to both the local console and Telnet connections.

•The timeout for Telnet cannot be disabled.

•Using the command without specifying a timeout restores the default setting.

Example

To set the timeout to two minutes, enter this command:

Console(config-line)#timeout login response 120

Console(config-line)#

4-17