SMC Networks SMC6824M manual Snmp Commands, Show access-group, Privileged Executive

COMMAND LINE INTERFACE

show access-group

This command shows the port assignments of ACLs.

Command Mode

Privileged Executive

Example

Console#show access-group

Interface ethernet 1/2

IP standard access-list david

MAC access-list jerry

Console#

SNMP Commands

Controls access to this switch from management stations using the Simple Network Management Protocol (SNMP), as well as the error types sent to trap managers.

SNMP Version 3 provides security features that cover message integrity, authentication, and encryption; as well as controlling user access to specific areas of the MIB tree. To use SNMPv3, first set an SNMP engine ID (or accept the default), specify read and write access views for the MIB tree, configure SNMP user groups with the required security model (i.e., SNMP v1, v2c or v3) and security level (i.e., authentication and privacy), and then assign SNMP users to these groups, along with their specific authentication and privacy passwords.

Table 4-41 SNMP Commands

Command	Function	Mode	Page
snmp-server	Enables the SNMPv3 server	GC	4-152
show snmp	Displays the status of SNMP communications	NE,	4-153
		PE
snmp-server	Sets up the community access string to permit	GC	4-154
community	access to SNMP commands
snmp-server contact	Sets the system contact string	GC	4-154

4-151