SMC Networks SMC6824M manual IP Filter Commands, Management, Enable 4-25authentication enable

COMMAND LINE INTERFACE

Related Commands

enable (4-25)authentication enable (4-99)

IP Filter Commands

Table 4-11 IP Filter Commands

Command	Function	Mode	Page
management	Configures IP addresses that are allowed	GC	4-37
	management access
show management	Displays the switch to be monitored or	PE	4-38
	configured from a browser

management

This command specifies the client IP addresses that are allowed management access to the switch through various protocols. Use the no form to restore the default setting.

Syntax

[no] management {all-client http-client snmp-client telnet-client}start-address[end-address]

•all-client- Adds IP address(es) to the SNMP, web and Telnet groups.

•http-client- Adds IP address(es) to the web group.

•snmp-client- Adds IP address(es) to the SNMP group.

•telnet-client- Adds IP address(es) to the Telnet group.

•start-address- A single IP address, or the starting address of a range.

•end-address- The end address of a range.

Default Setting

All addresses

Command Mode

Global Configuration

4-37