SMC Networks SMC6824M manual Command Groups, Command Group Index, Command Group Description

COMMAND LINE INTERFACE

Command Groups

The system commands can be broken down into the functional groups shown below.

Table 4-4 Command Group Index

Command Group	Description	Page
Line	Sets communication parameters for the serial port and	4-14
	Telnet, including baud rate and console time-out
General	Basic commands for entering privileged access mode,	4-25
	restarting the system, or quitting the CLI
System	Controls system logs, system passwords, user name,	4-31
Management	browser management options, and a variety of other
	system information
Flash/File	Manages code image or switch configuration files	4-81
Authentication	Configures logon access using local or remote	4-97
	authentication; also configures port security and IEEE
	802.1X port access control
Access Control	Provides filtering for IP frames (based on address,	4-119
Lists	protocol, TCP/UDP port number or TCP control code)
	or non-IP frames (based on MAC address or Ethernet
	type)
SNMP	Activates authentication failure traps; configures	4-151
	community access strings, and trap managers; also
	configures IP address filtering
Interface	Configures the connection parameters for all Ethernet	4-170
	ports, aggregated links, and VLANs
Mirror Port	Mirrors data to another port for analysis without	4-184
	affecting the data passing through or the performance of
	the monitored port
Rate Limiting	Controls the maximum rate for traffic transmitted or	4-186
	received on a port
Link Aggregation	Statically groups multiple ports into a single logical	4-188
	trunk; configures Link Aggregation Control Protocol
	for port trunks

4-11