SMC Networks SMC6824M manual 219, Changing Priorities Based on ACL Rules

CLASS OF SERVICE CONFIGURATION

Web – Click Priority, ACL Marker. Select a port and an ACL rule. To specify a ToS priority, mark the Precedence/DSCP check box, select Precedence or DSCP from the scroll-down box, and enter a priority. To specify an 802.1p priority, mark the 802.1p Priority check box, and enter a priority. Then click Add.

Figure 3-99 Changing Priorities Based on ACL Rules

CLI – This example changes the DSCP priority for packets matching an IP ACL rule, and the 802.1p priority for packets matching a MAC ACL rule.

Console(config)#interface ethernet 1/1	4-171
Console(config-if)#match access-list ip bill set dscp 0	4-137
Console(config-if)#match access-list mac mike set priority 0	4-149
Console(config-if)#end
Console#show marking	4-138
Interface ethernet 1/1

match access-list IP bill set DSCP 0 match access-list MAC a set priority 0

Console#

3-219