SMC Networks SMC6824M manual Rstp/Mstp

COMMAND LINE INTERFACE

Table 4-56 Spanning Tree Commands (Continued)

Command	Function	Mode	Page
spanning-tree	Configures the spanning tree bridge hello	GC	4-209
hello-time	time
spanning-tree max-age	Configures the spanning tree bridge	GC	4-210
	maximum age
spanning-tree default	Sets the spanning-tree priority to use	GC	4-211
priority	increments specified by IEEE 802.1D
	(steps of 1) or 802.1t (steps of 4096)
spanning-tree priority	Configures the spanning tree bridge priority	GC	4-211
spanning-tree	Configures the path cost method for	GC	4-212
pathcost method	RSTP/MSTP
spanning-tree	Configures the transmission limit for	GC	4-213
transmission-limit	RSTP/MSTP
spanning-tree	Adjusts the bridge priority in an attempt to	GC	4-214
backup-root	take over as the root bridge if it loses
	contact with the original root device
spanning-tree	Changes to MSTP configuration mode	GC	4-214
mst-configuration
mst vlan	Adds VLANs to a spanning tree instance	MST	4-215
mst priority	Configures the priority of a spanning tree	MST	4-216
	instance
name	Configures the name for the multiple	MST	4-217
	spanning tree
revision	Configures the revision number for the	MST	4-218
	multiple spanning tree
max-hops	Configures the maximum number of hops	MST	4-218
	allowed in the region before a BPDU is
	discarded
spanning-tree	Disables spanning tree for an interface	IC	4-214
spanning-disabled
spanning-tree cost	Configures the spanning tree path cost of	IC	4-220
	an interface
spanning-tree	Configures the spanning tree priority of an	IC	4-221
port-priority	interface

4-205