SMC Networks SMC6824M manual Configuration Commands

ENTERING COMMANDS

Username: guest

Password: [system login password]

CLI session with the SMC6824M is opened.

To end the CLI session, enter [Exit].

Console#enable

Password: [privileged level password if so configured]

Console#

Configuration Commands

Configuration commands are privileged level commands used to modify switch settings. These commands modify the running configuration only and are not saved when the switch is rebooted. To store the running configuration in nonvolatile storage, use the copy running-configstartup-configcommand.

The configuration commands are organized into different modes:

•Global Configuration - These commands modify the system level configuration, and include commands such as hostname and snmp-server community.

•Access Control List Configuration - These commands are used for packet filtering.

•Interface Configuration - These commands modify the port configuration such as speed-duplexand negotiation.

•Line Configuration - These commands modify the console port and Telnet configuration, and include commands such as parity and databits.

•VLAN Configuration - Includes the command to create VLAN groups.

To enter the Global Configuration mode, enter the command configure in Privileged Exec mode. The system prompt will change to “Console(config)#” which gives you access privilege to all Global Configuration commands.

Console#configure

Console(config)#

4-8