SMC Networks SMC6824M Ip http secure-server, Syntax No ip http secure-server Default Setting

COMMAND LINE INTERFACE

Example

Console(config)#ip http server

Console(config)#

Related Commands

ip http port (4-40)

ip http secure-server

This command enables the secure hypertext transfer protocol (HTTPS) over the Secure Socket Layer (SSL), providing secure access (i.e., an encrypted connection) to the switch’s web interface. Use the no form to disable this function.

Syntax

[no] ip http secure-server

Default Setting

Enabled

Command Mode

Global Configuration

Command Usage

•Both HTTP and HTTPS service can be enabled independently on the switch. However, you cannot configure the HTTP and HTTPS servers to use the same UDP port.

•If you enable HTTPS, you must indicate this in the URL that you specify in your browser: https://device[:port_number]

•When you start HTTPS, the connection is established in this way:

-The client authenticates the server using the server’s digital certificate.

-The client and server negotiate a set of security protocols to use for the connection.

-The client and server generate session keys for encrypting and decrypting data.

•The client and server establish a secure encrypted connection.

•A padlock icon should appear in the status bar for Internet Explorer 5.x and Netscape Navigator 4.x or later versions.

4-41