OPERATING INSTRUCTIONS (cont’d)

START OPERATION

1)Place the product in an upright position on a flat, stable, and heat- resistant surface. Make sure there is nothing flammable or heat sensitive within 100cm (39 inches). Operating the product in any other position could cause a hazard.

2)Insert the plug into a suitable wall socket. The dehumidifier is suitable for operating on an electricity supply having the same voltage as that shown

on its rating label.

3)Make sure the water tank is correctly located. After switching on the machine for the first time, if the “Bucket Full” light illuminates, pull out the water tank and check that the “float” lever is able to move freely, then return the water tank to the correct position (Fig. 1).

Fig. 1

WATER FULL

INDICATOR LIGHT (RED)

When the water tank is full and/or incorrectly positioned inside the cabinet, the water full red light turns on and remains on until such time that the tank is emptied and/or correctly re-positioned.

This condition will result in the immediate shut down of the dehumidifying system (both compressor and fan motor operations are terminated). This is a safety feature. When the water tank is emptied and/or correctly re-positioned, the dehumidifier will resume operation automatically.

NOTE: It may take several minutes before operating conditions resume.

BUCKET

FULL LIGHT

•When the water tank is full the machine will stop and the“Bucket Full” light will illuminate.

•The water tank should be carefully removed from the machine by sliding it outward from the front of the unit, and it should be emptied. When the empty tank is replaced properly in the machine, the unit will start up and run normally (Fig. 2).

NOTE: Please use both hands to carefully empty the water tank.

Fig. 2

FACTORY

Each time the unit is disconnected/re-connected and/or in the event of a power failure,

DEFAULT SETTING

the electronic circuitboard automatically defaults to the following factory setting:

Humidity Setting: 60%

Fan Speed: Low

NOTE: In the event of a power failure, all previous settings are automatically erased/cancelled. If your

program setting was different from the above (default setting) it will be necessary to re-program your settings.When the unit is switched “Off” manually (using the on/off keypad) the unit will always default to the last program setting that was used.

WATER TANK

Proper installation of the water tank is crucial in maintaining reliable dehumidifier

OPERATION

operation. The water tank holds accumulated condensed water and, by means of a safety

 

switch, controls both the water level and operation of the dehumidification process.

 

When the water tank is full and/or accidentally displaced inside the cabinet, the float switch actuator (inside the tank) breaks contact with the safety switch. This condition results in the immediate shut down of the compressor and fan motor system, preventing moisture from being condensed.

NOTE: Never tamper with or attempt to defeat the water level (safety) float switch system.

5

www.sylvane.com 1-800-934-9194

Page 5 Page 7
Page 6
Image 6
Danby DDR5009REE Start Operation, Water Full Indicator Light RED, Bucket Full Light, Factory, Default Setting, Water Tank
Page 5 Page 7

DDR7009REE, DDR6009REE, DDR5009REE specifications

The Danby DDR series of dehumidifiers, including the DDR5009REE, DDR7009REE, and DDR6009REE, represent a pioneering approach to humidity control in residential spaces. Designed for efficiency, these models are equipped with cutting-edge technology to optimize performance while providing comfort in your home.

One of the primary features of the Danby DDR series is their impressive moisture removal capacity. The DDR5009REE can remove up to 50 pints of moisture daily, making it ideal for spaces up to 3,000 square feet. The DDR6009REE follows closely, with a similar capacity suited for medium-sized areas. The DDR7009REE takes it a step further, capable of handling moisture in larger spaces up to 4,500 square feet. This variety ensures that homeowners have options tailored to their specific needs.

Energy efficiency is another standout characteristic of the Danby DDR series. They are Energy Star certified, meaning they meet strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only helps reduce electricity bills but also minimizes environmental impact, making these models an eco-friendly choice for dehumidification.

Equipped with a user-friendly electronic control panel, these dehumidifiers feature an adjustable humidity setting and a built-in humidistat that automatically optimizes moisture removal based on the current conditions. Users can easily monitor humidity levels and set their preferred levels, ensuring a comfortable living environment.

The DDR series also incorporates advanced technology for quiet operation, with sound levels reduced compared to standard models. This makes them suitable for use in bedrooms and living areas without causing disturbance.

Maintenance is simplified with the inclusion of a removable, washable filter, which helps to trap dust and particles, promoting cleaner air. Additionally, these dehumidifiers come with a continuous drainage option, allowing for hassle-free water removal.

Overall, the Danby DDR5009REE, DDR7009REE, and DDR6009REE dehumidifiers blend functionality with modern aesthetics, ensuring they not only perform effectively but also fit seamlessly into various home decors. Whether you're combating dampness in your basement or managing humidity in your main living areas, this series offers reliable and efficient solutions to enhance indoor air quality and comfort.
Top Page Image Contents