Electrolux ESF 65020 Something not working, Fault code, Malfunction, Possible cause, flash of the

Models: ESF 65020

1 48
Download 48 pages 41.21 Kb
Page 31
Image 31
something not working
something not working

electrolux

31

Something not working

The dishwasher will not start or stops during operation.

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer.

Switch off the dishwasher, open the door and carry out the following suggested corrective actions.

Fault code

continuous flashing of the light of the running programme

1 flash of the

end

of programme

 

indicator light

 

continuous flashing of the light of the running programme

2 flashes of the end of programme indicator light

continuous flashing of the light of the running programme

3 flashes of the end of programme indicator light

Malfunction

The dishwasher does not fill with water

The dishwasher will not drain

Anti-flood device is activated

Possible cause

Solution

The water tap is blocked or furred with limescale

The water tap is turned off

The filter (where present) in the threaded hose fitting at the water inlet valve is blocked

The water inlet hose has not been correctly laid or it is bent or squashed

The sink spigot is blocked

The water drain hose has not been correctly laid or it is bent or squashed

Clean the water tap
Turn the water tap on

Clean the filter in the threaded hose

Check the water drain hose connection

Clean out the sink spigot

Check the water drain hose connection

Close the water tap and contact your local Service Force Centre

Page 31
Image 31
Electrolux ESF 65020 user manual Something not working, The dishwasher will not start or stops during operation, Fault code