32 | electrolux | something not working |
Fault code
Malfunction | Possible cause |
| Solution | |
The programme | ● The | dishwasher’s | ||
does not start | door has not been | |||
| properly | closed | ||
| ● The | main | plug is | |
| not | plugged | in | |
| ● The | fuse has |
| |
| blown out | in | the | |
| household | fuse | ||
| box |
|
|
|
| ● Delay start has | |||
| been | set |
|
|
●Close the door
●Insert the main plug
●Replace the fuse
●If dishes are to be washed immediately, cancel the delay start
Once these checks have been carried out; close the dishwasher’s door and switch on the appliance. Press the button of the programme that was running before the intervention of the alarm. The programme will continue from the point at which it was interrupted.
If the malfunction or fault code reappears contact the Service Force Centre.
For other fault codes not described in the above chart, please contact your Service Force Centre.
Contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.).
This information can be found on the rating plate located on the side of the dishwasher door.
So that you always have these numbers at hand, we recommend you to make a note of them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . .
PNC :. . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . .