You experience static, noise, or fading in and out
•The handset may be out of range of the base. Move closer to base.
•Make sure base is not plugged into an electrical outlet with another household appliance. If necessary, relocate the base.
•Charge the battery (for 16 hours).
Unit beeps
•Clean the charging contacts on the cordless handset and base charge cradle with a soft cloth or an eraser.
•See solutions for “No dial tone ” on previous page.
•Replace the battery.
Memory dialing doesn’t work
•Did you program the memory location keys correctly?
•Did you follow proper dialing sequence?
Unit locks up and no communication between the base and cordless handset
•Unplug the power adaptor from the electrical outlet and the back of the base. Remove the handset battery. Wait for 30 seconds and plug the power adaptor back into the base and electrical outlet. Reconnect the battery and charge for 16 hours.
Caller ID Solutions
No Display
•Charge the battery (for 16 hours). Or replace the battery.
•Make sure the unit is connected to a
Caller ID Error Message
•The unit displays this message if it detects anything other than valid Caller ID information during the silent period after the first ring. This message indicates the presence of noise on the line.
No Caller ID
•You must be subscribed to the standard Name/Number Caller ID service from your local telephone company to receive CID information.
55
