GE 28821xx3, 881, 28821xx4 Page, Handset to Handset Paging, Paging All Handsets from a Handset

Page

The page feature helps you locate a misplaced handset. To send and receive pages, all handsets must be registered. If your handset is not registered, follow the instructions in the Registration section of this manual.

Handset to Handset Paging

(applicable only with additional handsets)

1.Make sure the phone is OFF (not in TALK mode).

2.Press and release the delete/intercom/conf button on a handset. PAGING EXTENSION? shows in the display.

3.Use the touch-tone pad to enter the handset number you want to page.

4.To cancel the page, press the END/cancel, delete/intercom/conf, or TALK button on the originating handset, or press the END/cancel button on the receiving handset.

Paging All Handsets from a Handset

(applicable only with additional handsets)

1.Make sure the originating phone is OFF (not in TALK mode).

2.Press and release the delete/intercom/conf button on a handset. PAGING EXTENSION? shows in the display.

3.Use the touch-tone pad to enter the handset number you want to page. (1= to page Handset 1, 2=to page handset 2, etc., and * tone=to page all handsets)

4.To cancel the page, press the END/cancel, delete/intercom/conf, or TALK button on the originating handset, or press the END/cancel button on the receiving handset.

Paging from the Base/Group Page

Use the base-only to page all registered handsets at the same time.

1.Press the find button on the base. All handsets beep for two minutes, and PAGING FROM BASE shows on each handset’s display.

2.To cancel the page, press the find button on the base, or press the TALK button or the END/cancel button on each handset.

38