6.The receiving handset will turn on the microphone and the originating handset will turn on the speakerphone to monitor sound from the receiving handset.
NOTE: For room monitoring mode to work, the originating handset must NOT be on the cradle.
NOTE: While in room monitoring mode, the handsets will emit an alert tone approximately every 5 seconds if there is an incoming call. You may press the SPEAKER button to quit room monitor and answer the call.
NOTE: While in room monitoring mode, the originating handset can be switched to monitor by handset earpiece by pressing the TALK button once. Switch back to speakerphone by pressing the SPEAKER button once.
NOTE: Press the END/cancel button on the handset to exit room monitor mode.
Answerer
In the Answerer Menu, there are two programmable submenus: Set Alarm Clock and Handset Setup.
1.Make sure your phone is OFF (not in TALK mode).
2.Press the mute/menu OK button to go to the main menu.
3.Press CALLER
4.Press mute/menu OK button to enter the submenu.
Set Alarm Clock
1.Make sure your phone is OFF (not in TALK mode).
2.Press the mute/menu OK button to go to the main menu.
3.Press CALLER
4.Press mute/menu OK button to enter the submenu, ALARM 1ON 2OFF shows on the display.
5.Use the
6.If you select ON, press the mute/menu OK button to confirm and advance Set Alarm Time
7.Use the number keys to enter the time, then press the #/pause button to toggle between AM and PM.
25
