GE 0007, 881 Speakerphone Operation, Making a Call, VMWI / Visual Ringer Indicator on Handset

VMWI / Visual Ringer Indicator on Handset

IMPORTANT: In order to use this unit’s Voice Mail Waiting Indicator (VMWI) feature, you must subscribe to this service from your phone company.

The VMWI indicator on the top of the handset flashes when you receive a new message from your service provider. Also, it serves as a Visual Ringer function. It will flash when there is an incoming call.

Speakerphone Operation.

NOTE: If you are using the speakerphone, remain close to handset so the party you are speaking to can hear you.

If you are using the handset and want to switch to the speakerphone, press the SPEAKER button, press END/cancel to end conversation.

If you are using the speakerphone and want to switch to the handset, press the TALK button, press END/cancel again to end conversation.

Making a Call

1.Press the TALK or SPEAKER button. Dial the desired number.

-OR -

Dial the number first, then press the TALK or SPEAKER button. - OR -

Press the CALLER ID-VOLUME ( 6 or 5) button to select the desired record, then press the TALK or SPEAKER button.

2.When finished, press the END/cancel button to hang up.

NOTE: You may enter up to 25 pre-dial digits.

NOTE: If you want to delete the pre-dial number you entered, press the delete/intercom/conf button until all of the digits are erased.

35