GE 881, 28821xx4, 28821xx3 Message Alert, Security Code, Speaker Volume, From the Answerer menu

Message Alert

This feature sets your answering system to give an alert tone every 10 seconds when there are new messages.

From the Answerer Menu:

1.Press the CALLER ID-VOLUME (5or 6) button to scroll to the MESSAGE ALERT sub-menu.

2.Press mute/menu OK button to enter the menu. NEW MSG ALERT 1ON 2OFF shows in the display.

3.Use the touch-tone pad to enter the selection, or use the CALLER ID-VOLUME (5or 6) button to scroll to the 1ON or 2OFF. The default setting is 2OFF.

4.Press the mute/menu OK button to confirm. You will hear a confirmation tone and the new setting shows in the display.

Security Code

You can access the answering system from a tone dialing telephone in another (remote) location. The security code is required for remote access, and it prevents unauthorized access to your answering system.

From the Answerer menu:

1.Press the CALLER ID-VOLUME (5or 6) button to scroll to the SECURITY CODE sub-menu.

2.Press mute/menu OK button to enter the menu. SECURITY CODE 1 2 3 shows in the display.

3.Use the touch-tone pad to enter your new 3-digit security code. The default setting is 123.

4.Press the mute/menu OK button to confirm. You will hear a confirmation tone and the new security code shows in the display.

NOTE: If you make a mistake, use the delete/intercom/conf button to delete the security code and begin again.

Speaker Volume

Use the volume (5or 6) buttons to adjust speaker volume on the base to a comfortable level. L1 is the minimum speaker volume and L5 is the maximum.

18