Sharp MD-MT877 operation manual Error Messages, References

ERROR MESSAGES		MEANING	REMEDY
NO DISC	● A disc has not been loaded.		● Load a disc.
NO SIGNAL	● Poor connection of the digital cable.		● Connect the digital cable securely.
(noSIG.)	● No output signal comes out from the connected		● If the portable CD player has a function to prevent sound
	unit to playback.		skips, deactivate it.
	● The input signal has improper sampling fre-		● Playback with the connected unit.
	quency.
PLAY MD	● You recorded on a playback-only disc.		● Replace it with a recordable disc.
(PLAYmd)
POWER ?	● The battery charger is defective.		● To have it repaired, go to the distributor where you
			purchased the unit.
PROTECTED	● The write protection tab of a MiniDisc is set to		● Move the write protection tab back to its original position.
	the protected position.		● Replace it with a recordable MiniDisc.
	● You tried to record on a playback-only disc.
SORRY	● Since a track number is currently being located		● Wait for a while and try the operation again.
(Sorry)	or updated, the unit cannot accept your com-
	mand.
TEMP OVER	● The temperature is too high.		● Turn off the power, and wait for a while.
(TEMP!)
TOC FORM **	● There is an error in the recording signal.		● Erase all of the tracks, and then record again.
(Tform**)
TOC FULL	● There is no space left for recording character		● Replace it with another recordable disc.
	information (track names, disc names, etc.).
Tr. Protect	● The track has been protected from being erased.		● Edit the track with the device on which it was recorded.
? DISC	● A disc which contains data other than music was
(? DISC)	played.		● A disc which contains non-music data cannot be played.
	● There is an error in the signal recorded on the		● Replace it with another recorded disc.
	disc.
	● Stamping is not possible.		● Retry.

( ) : Error messages seen on the remote control. Number or symbol appears in * position.

References

55

– Error Messages –