Sharp MD-MT877 operation manual Specifications, References

References –Specifications–

58

Specifications

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice.

The performance specification figures indicated are nominal values of production units. There may be some devia- tions from these values in individual units.

Power source	DC 1.2V:	Rechargeable Nickel-Metal Hydride battery (AD-N55BT) x 1
	DC 5V:	AC adaptor (AC 120V, 60 Hz)
	DC 1.5V:	Commercially available, “AA” size (LR6), alkaline battery x 1
	DC 1.5V:	Separately available car adaptor, AD-CA55X (for cars with a 12-24V DC nega-
		tive ground electrical system) (Used with separately available plug adaptor
		(AD-M66PA))
Power consumption	7 W (AC adaptor)
Output power	RMS; 10 mW (5 mW + 5 mW) (0.2% T.H.D.)
Charging time	Approx. 3.5 hours
Input sensitivity	MIC H: reference input level		0.25 mV	input impedance	10 k ohms
	MIC L:	reference input level	2.5 mV	input impedance	10 k ohms
	LINE:	reference input level	100 mV	input impedance	20 k ohms

Output level	Earphones: maximum output level		5 mW + 5 mW	load impedance	32 ohms
	LINE:	specified output	250 mV (-12 dB)	load impedance	10 k ohms
Dimensions	Width:	2-27/32” (71.9 mm) Height:	11/16” (16.8 mm)	Depth: 3-1/8” (78.7 mm)
Weight	0.29 lbs. (131 g) with rechargeable battery
Input jack	Line/optical digital, microphone (powered by the main unit)
Output jack	Earphones (impedance: 32 ohms)/remote control unit
Type	Portable MiniDisc recorder
Signal readout	Non-contact, 3-beam semiconductor laser pickup
Audio channels	Stereo 2 channels/monaural (long-play mode) 1 channel
Frequency response	20 – 20,000 Hz (± 3 dB)