Sharp MD-MT877 operation manual Error Messages, ErrorMessages, References

References –ErrorMessages–

54

Error Messages

ERROR MESSAGES	MEANING	REMEDY
BATT EMPTY	● The battery is run down.	● Charge the rechargeable battery or replace the alka-
(LoBATT)		line battery (or use the AC adaptor for power).
BLANK MD	● Nothing is recorded.	● Replace the disc with a recorded disc.
(BLANK)
Can’t COPY	● You tried to record from a copy prohibited	● Record using the analog cable.
(Can’tC)	MiniDisc.
Can’t EDIT	● A track cannot be edited.	● Change the stop position of the track and then edit it.
(Can’tE)
Can’t READ *	● The disc data cannot be read because the disc	● Reload the disc.
(Can’tS)	is damaged.	● Replace it with another recorded disc.
(Can’tT)
(Can’tU)
Can’t REC	● Recording cannot be performed correctly due to	● Re-record or replace it with another recordable disc.
(Can’tR)	vibration or shock.
Can’t STAMP	● Stamp function does not work.	● Check the number of tracks.
Can’t WRITE	● Cannot save the TOC information correctly to a	● Replace the disc with another recordable disc.
(Can’tW)	MiniDisc. (A large portion of the disc has been
	damaged.)
CHARGEmode	● The Charge/Operation switch is not set to the	● Set the Charge/Operation switch to the operation mode.
	operation mode when using this unit with the AC
	adaptor.
DEFECT	● The disc is scratched.	● If the sound you hear is not right, record again.
(DEFECT)		● Replace the disc with another recordable disc.
DISC FULL	● The disc is out of recording space.	● Replace it with another recordable disc.
Er-MD **	● The microprocessor has reported a system fault	● To have it repaired, go to the distributor where you pur-
(ErMD*)	and the unit is out of order.	chased the unit.
HOLD	● The unit is in the hold mode.	● Return the HOLD switch to its original position.
(HOLD)
LOCKED	● You removed a MiniDisc while recording or	● Turn off the power and remove the MiniDisc.
(Can’tLOCK)	editing.