Recording (continued)
BasicOperation |
|
22
To interrupt recording
Press the 06 button.
●To resume recording, press the 06 button again.
●The track number will be increased by one each time the recording is interrupted.
To stop recording
Press the • ■ / :OFF button.
●When recording stops, “TOC” appears (Table Of Con- tents). While “TOC” appears the MiniDisc recorded contents have not yet been updated.
●To prevent the new recording from being lost it is not possible to remove the MiniDisc while “TOC” is dis- played.
TOC display
To update the recorded contents of the MiniDisc
Press the • ■ / :OFF button while in the stop mode.
●The power turns off after recorded contents have been updated on the MiniDisc.
About the TOC
After any recording or editing function “TOC” (Table Of Contents) is displayed. To finalize the recording or editing function, press the • ■ / :OFF button. During this process “TOC” will flash and “TOC EDIT!” will be displayed.
During any recording or editing function the MiniDisc unit lid is locked, the MiniDisc cannot be removed until the pro- cess is finalized.
Warning:
If the power is removed (Battery/AC adaptor) while “TOC” is displayed, the MiniDisc unit lid will remain locked until the battery/main power is restored and the unit is turned on. Your new recordings or edited changes will be lost and your MiniDisc may become unusable.
Caution:
While “TOC” or “TOC EDIT!” is displayed, follow the in- structions below.
–Do not jerk or bump the unit.
–Do not unplug the AC adaptor.
–Do not remove the rechargeable battery or an alkaline battery.
–Do not subject the unit to shock.
Otherwise, tracks may not be recorded properly.
