Sharp MD-MT877 Checking Displays, To check the remaining recording time, time of the track

Checking Displays

To check the elapsed time and remaining	To check the remaining recording time
time of the track	and the total playing time
During playback, press the DISP button.	While in the stop mode, press the DISP button.
Each time the button is pressed, the display will change as	Each time the button is pressed, the display will change as
follows:	follows:

< Main unit display > < Remote control display >

Track name	Disc name
	Total playing
	time

Elapsed playback	Remaining
time
	recording time

Remaining	Total playing
playback time
	time

Notes:

Useful Features

– Checking Displays –

●If the disc name or the track name was not originally recorded on the MiniDisc, “NO NAME” will be displayed.

●Remaining recording time will not be displayed with a playback-only MiniDisc.

●Elapsed playback time and remaining playback time may be different from the actual time.

●Remaining time of recording varies depending on the set recording mode.

●If the remaining time of recording is over 100 minutes, the last digit of the seconds is not displayed on the re- mote control.

39