To prevent recorded MiniDiscs from be- ing erased accidentally
Slide the accidental erase prevention tab, located on the side of the MiniDisc, in the direction indicated by the arrow.
The MiniDisc will then be protected against accidental era- sure.
About sampling rate converter
This portable MD incorporates a sampling rate converter meaning it can record from digital radios or DAT tape re- corders.
Note for digital recording
You cannot copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. It is prevented by the SCMS (Serial Copy Management System). Recording from analog inputs is not affected.
Operation
Recording –
Recordable Recording prevented
To add a recording to such a MiniDisc, slide the ac- cidental erase prevention tab back to its original po- sition.
Helpful tip when attaching a label
When attaching a label to a MiniDisc cartridge, be sure to note the following. If the label is not attached properly, the MiniDisc may jam inside the unit and it may not be pos- sible to remove it.
● If the label peels off or partially lifts away, replace it with a new one.
●Do not put a new label on top of an existing one.
●Attach the label only in the specified location.
Digital signals | Digitally recorded | Cannot record |
| MiniDisc |
|
CD player, MiniDisc player, etc.
DigitalDigital
connection connection
Basic
23
–