Sharp MD-MT877 operation manual Hold Function, Preparation, HoldFunction, as a crowded train

Hold Function

The present operation condition can be kept even if other buttons are accidentally pressed in a place such

Preparation –HoldFunction–

16

as a crowded train.

Main unit

Press the • ■ / –HOLD button for 2 seconds or more.

HoldRelease

If the battery is inserted or the AC adaptor is connected, you can set this function even when the power is turned off.

To cancel the hold mode

Press and hold down the • ■ / –HOLD button for 2 sec- onds or more while the unit is in the hold mode.

●“HOLD OFF” will be shown.

Remote control unit

Move the HOLD switch to the safety position (direction indicated by the arrow).

Orange mark

Hold

To cancel the hold mode

Move the HOLD switch away from the safety posi- tion (the opposite direction of the arrow).

If the hold function is active while the power is turned off, the power cannot be turned on by mis- take and the battery will not be drained.