Troubleshooting
Many potential “problems” can be resolved by the owner without calling a service technician.
If something seems to be wrong with this product, check the following before calling your authorized SHARP dealer or service center.
References |
|
56
PROBLEM |
|
| CAUSE |
|
|
|
|
The unit does not ● | Is the AC adaptor disconnected? | ||
turn on. |
| ● | Is the battery exhausted? |
|
| ● | Is the unit in the hold mode? |
|
| ● Has condensation formed inside the | |
|
|
| unit? |
|
| ● Is the unit being influenced by me- | |
|
|
| chanical shock or by static electric- |
|
|
| ity? |
|
| ||
No sound | is ● Is the volume set too low? |
heard from the ● | Is the remote control unit or the ear- |
earphones. | phones plugged in? |
● Are you trying to play a MiniDisc with | |
| data on it instead of a MiniDisc contain- |
| ing music? |
When the opera- ● | Is the unit in the hold mode? | |||||
tion buttons are ● | Is the battery exhausted? | |||||
pressed, the unit ● | Is the remote control unit plug or the | |||||
does not respond. |
| earphones plug inserted firmly? | ||||
|
|
|
|
|
| |
Some sounds ● | Is the battery exhausted? | |||||
are skipped. | ● Is the unit being subjected to exces- | |||||
|
| sive vibration? | ||||
|
|
|
|
|
|
|
PROBLEM CAUSE
The MiniDisc can- ● Has the track number or character
not be ejected. information been updated on the disc yet?
●Is the unit in the recording or edit- ing mode?
Recording and ● Is the MiniDisc protected against editing are im- accidental erasure?
possible. ● Is the unit connected properly to the other equipment?
●Is the AC adaptor unplugged or did a power failure occur while recording or editing?
●Is the unit in the hold mode?
●Is an optical signal being output from the stereo system?
Read the operation manual for the stereo system.
The battery cannot ● Is the select switch for charging/
be charged.operation set on the charging side?
●Is the jack clean?
Nothing appears ● Is the remote control display set to on the remote “LIGHT OFF”?
control display.