To add characters
1 Put the unit in the character input mode.
(Perform steps 1 - 2 on page 43.)
2 Press the VOL + or VOL – button to move the cursor to the right of the character, where you want to add a new character.
3 Select the character to add.
(Perform steps 3 - 4 on page 43.)
4 Press the ENTER button.
5 Press the EDIT button.
6 “TOC” will be displayed. To write the up- dated contents to the MiniDisc, press the
• ■ / :OFF button.
You cannot remove the MiniDisc while TOC is dis- played. TOC will not disappear until the recorded contents have been updated.
Advanced Features
45