1 Press the REC button.
The record pause mode is entered.
2 Begin playback on the stereo system con- nected to this portable MD.
To enable the record level to be set.
3 Press the 5 or 4 button to adjust the recording level.
Analog recording
Adjust the recording level so that the maximum sound volume from the source makes the reading swing somewhere between
Level meter indicator
0dB
4dB
Digital recording
You can adjust the level in 1 dB increments within the range of +12 -
+12 -
Once you adjust the digital recording level, the set- ting remains even after the recording stops. (For cancellation instructions, see page 41.)
4 Press the PAUSE button on the stereo sys- tem to enter the playback pause mode at the point you wish to start recording.
Here you can select the track to be recorded.
5 Press the MODE button repeatedly to se- lect the recording mode (page 32).
(Stereo recoding)
(2 times long recording)
(4 times long recording)
(Monaural recording)
6 Press the 06 button to start the MiniDisc unit recording.
7 Begin playback on the stereo system, the output will be recorded.
Notes:
●When recording, it is recommended to use the AC adap- tor and also install the charged battery. Should the power failure occur, the power source would be automatically switched to the rechargeable battery.
●Changing the volume level while recording does not af- fect the recording.
●You cannot adjust the bass level while recording.
Basic Operation
21
– Recording –