OPERATING INSTRUCTIONS

8

7

6

5

9

1 2 3

1)POWER Button: On / Off

2)FAN SPEED Button: High / Low

3)TIMER Button: When unit is operating, press TIMER to set number of hours desired until unit will shut off.When unit is in stand-by, press TIMER to set number of hours desired until unit will turn on.

Setting timer from 1-24 hours. To cancel the timer, proceed as above but set the “timer off” to zero (0) hours.

4)°C/°F Button: Press the °C/°F button to toggle between Celsius and Fahrenheit.

5)Receiving Sensor

6)SET HUMIDITY/CURRENT HUMIDITY DISPLAY: When machine is running, it displays the

4

current humidity. Press UP or DOWN buttons to select humidity setting. The humidity is adjusted in increments of 5% by each press. Adjustable range is within 30% RH to 90% RH. 10 seconds after setting humidity, the display will change back to the current humidity.

7)CURRENT TEMP/ TIMER SET DISPLAY: When machine is running, it displays the current temperature. Press the TIMER button to set the machine to shut off automatically after specified amount of time. 10 seconds after displaying the timer, the display will change back to current temperauture.

8)DEFROST LIGHT: When temperature is low, unit enters defrost mode and defrost light illuminates.

9)BUCKET FULL LIGHT: When water tank is full, bucket full light illuminates.

REMOTE CONTROL The functions work the same as your dehumidifiers touch controls.

1)Power Key: On / Off

2)Fan Speed Key: High/Low

3)On / Off Timer Key:

In running mode: Auto switch Off

In standby mode: Auto switch On

4)Temperature display selector button (Celsius / Fahrenheit): Press the°C/°F switch button to toggle between °C and °F.

5)Timer/ Temperature Buttons:

A)Used for adjusting the timer and thermostat.

B)The default display is room temperature.

C)When “+” or “-” button is pressed, the set temperature is displayed and may be adjusted. After 10 seconds the display will revert back to room temperature. The remote operates within a range of 6 meters (16.4 ft.)from the receiver located inside the main unit. Any obstruction between the receiver and remote may cause signal interference, limiting the ability to program the main unit.

This Class B digital apparatus complies with Canadian ICES-003.

1

2

3

4

5

BATTERIES: Remove the cover on the back of the remote controller and insert the batteries with the (+) and (-) poles pointing in the proper direction.

CAUTION: Use only AAA or IECR03 1.5V batteries. Remove the batteries if the remote controller is not used for one month or longer. Do not attempt to recharge the supplied batteries. All batteries should be replaced at the same time. Do not dispose of the batteries in a fire as they may explode.

4

www.sylvane.com 1-800-934-9194

Page 4 Page 6
Page 5
Image 5
Danby DDR7009REE Operating Instructions, Power Button On / Off FAN Speed Button High / Low, Timer/ Temperature Buttons
Page 4 Page 6

DDR7009REE, DDR6009REE, DDR5009REE specifications

The Danby DDR series of dehumidifiers, including the DDR5009REE, DDR7009REE, and DDR6009REE, represent a pioneering approach to humidity control in residential spaces. Designed for efficiency, these models are equipped with cutting-edge technology to optimize performance while providing comfort in your home.

One of the primary features of the Danby DDR series is their impressive moisture removal capacity. The DDR5009REE can remove up to 50 pints of moisture daily, making it ideal for spaces up to 3,000 square feet. The DDR6009REE follows closely, with a similar capacity suited for medium-sized areas. The DDR7009REE takes it a step further, capable of handling moisture in larger spaces up to 4,500 square feet. This variety ensures that homeowners have options tailored to their specific needs.

Energy efficiency is another standout characteristic of the Danby DDR series. They are Energy Star certified, meaning they meet strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only helps reduce electricity bills but also minimizes environmental impact, making these models an eco-friendly choice for dehumidification.

Equipped with a user-friendly electronic control panel, these dehumidifiers feature an adjustable humidity setting and a built-in humidistat that automatically optimizes moisture removal based on the current conditions. Users can easily monitor humidity levels and set their preferred levels, ensuring a comfortable living environment.

The DDR series also incorporates advanced technology for quiet operation, with sound levels reduced compared to standard models. This makes them suitable for use in bedrooms and living areas without causing disturbance.

Maintenance is simplified with the inclusion of a removable, washable filter, which helps to trap dust and particles, promoting cleaner air. Additionally, these dehumidifiers come with a continuous drainage option, allowing for hassle-free water removal.

Overall, the Danby DDR5009REE, DDR7009REE, and DDR6009REE dehumidifiers blend functionality with modern aesthetics, ensuring they not only perform effectively but also fit seamlessly into various home decors. Whether you're combating dampness in your basement or managing humidity in your main living areas, this series offers reliable and efficient solutions to enhance indoor air quality and comfort.
Top Page Image Contents