SMC Networks SMC6824M manual Syntax Boot system unit boot-romconfig opcode filename

COMMAND LINE INTERFACE

boot system

Use this command to specify the file or image used to start up the system.

Syntax

boot system [unit:] {boot-romconfig opcode}: filename

The type of file or image to set as a default includes:

•boot-rom* - Boot ROM.

•config* - Configuration file.

•opcode* - Run-time operation code.

•filename - Name of the configuration file or image name.

•unit* - Specifies the stack unit. (Range: 1-8)

*The colon (:) is required.

Default Setting

None

Command Mode

Global Configuration

Command Usage

•A colon (:) is required after the specified unit number and file type.

•If the file contains an error, it cannot be set as the default file.

Example

Console(config)#boot system config: startup

Console(config)#

Related Commands

dir (4-87)whichboot (4-88)

4-89